Page 8 of 8

Posted: Fri 27. Sep 2019, 13:28
by Robert Gage
Thanks, Ron. (It's pouring with rain again! :( )

Posted: Wed 2. Oct 2019, 12:39
by Jyri Haveri
https://youtu.be/ijpap2vV89M

Here it is. It works great!

It is very interesting to use whip made by someone else. This and the tassel whip i won last time are a lot more handle heavier whips than mine.

Thanks a lot sir Roger!

Posted: Wed 2. Oct 2019, 12:45
by Ron May
It flows well, thanks for the video Jyri.

Ron

Posted: Wed 2. Oct 2019, 14:02
by Robert Gage
Very nice, Jyri! Thanks! :)

Posted: Wed 2. Oct 2019, 14:28
by Mark Elliott
Nice job, Roger and Jyri.

Posted: Thu 3. Oct 2019, 22:19
by Collin Weaver
Here are the first few teasers of Ben's whip. I literally only got a chance to hold it enough to place it in the light box and snap a couple photos, as I'm at work still.

Right off the bat though, I love the weight and balance of it. The taper starts immediately at the handle section, and finishes all the way down to an English eye hitch. No lumps or kinks to be spoken of either.

The fall is a twisted taper and weighted, and I noticed he takes the time to stitch the keeper loop on the end so no weight can come out and it's a very secure and safe system (Ben or anybody, if there's a tutorial on this method of fall I must have missed and if you can forward me the link :)) The heel knot is perfectly symmetrical, tight, and beautifully done.

I told Ben I learned a lot from reading over tutorials and methods he has posted in the past, and I am honored to be holding one of his whips.

It's pouring rain today, so hopefully I can get a chance to do a quick cracking video this weekend and give this whip some love it deserves!

Cheers

Image
Image
Image

Posted: Thu 3. Oct 2019, 22:22
by Ron May
Thanks for sharing Collin.

Ron

Posted: Thu 3. Oct 2019, 22:31
by Robert Gage
Collin, I have one of Ben's snakes just like this, but in red and black. I love it! :)

Posted: Sat 5. Oct 2019, 14:42
by Robby Amper
Ben is a great whip maker, absolutely!

Robby

Posted: Sat 5. Oct 2019, 17:46
by Sir Roger Tuson
Jyri,

I only gave that whip a couple of cracks after waxing before hanging it up. It's been there ever since. It was really good to see it finally flowing the way I hoped it would. Once it's properly broken in I hope you'll give us an update on how it goes.

Posted: Sat 5. Oct 2019, 19:07
by Jessie Edwards
Update: We are having a little trouble with paypal and some different policies from last year. Until they process all the documents they want from me, I’m unable to transfer the money to Robby. It will be done, I’ve talked it over with Robby and all is well. You all will be kept in the loop.

Posted: Tue 8. Oct 2019, 16:56
by Ben Varsek
Collin, thank you very much! I've made the fall using Tyler's method for making loaded falls - credit goes to Tyler:

https://www.youtube.com/watch?v=KMeHI1ct6k4

Robert, Robby, thank you very much!

All the best
Ben

Posted: Sun 13. Oct 2019, 17:25
by Wolfgang Timm
And today, finally, I tried Jyri’s 7ft stockwhip. Quite a difference to a bullwhip with strong transition...and it was too too windy for really good cracking practice.
At one point I was struggling to get a simple cattleman’s crack with my RIGHT hand whereas it worked with the left hand without any problem... The wind played a huge part in that (you can hear the noise in the background)
Anyway here is a little video, but I think I some more practice with this kind of whip to do it justice. But it’s super fun, I‘ll definitely take the time because with its long handle and light weight it just feels good. Not the „wrist-killing“ kind of whip. Probably requires a lot more movement with the whole arm.

https://m.youtube.com/watch?v=VVGlwvHGY ... e=youtu.be

Posted: Sun 13. Oct 2019, 18:10
by Ron May
Wolfgang, it looks like it flows and handles very nicely.
Thanks for posting the video.

Ron

Posted: Mon 14. Oct 2019, 18:26
by Jyri Haveri
Wolfgang well done!

Stockwhips made me say few certain curse words from very old and refined vocabulary for curse words we have here in Finland.

Just think that the handle is a long fork. Now imagine you take a hard boiled potato to the forks spikes.
Now you want to throw that potato from the forks spikes out of the window.
It is a little hard to explain but you can always try it :D

Now try the same movement with the whip with forward flick. If you cant go outside you can always try it inside, no need for a crack, just the voice you know you can get it to crack.

After this you may get the "click" feeling. In snake and bullwhips you want the energy to flow thru the handle and the transition to the tip. In stocks it goes right from the end of the handle to the tip. This is as it feels to me, they are just snappy buggers.

I did try it with my bolth hands and i didnt feel much difference. Maybe you just have to give those keepers some good cracking.

I hope you can get some help from this.

Posted: Mon 14. Oct 2019, 18:50
by Wolfgang Timm
Jyri, thank you VERY much this sounds like a very good analogy! The explanation helps a lot ... You are touching a point here with the overhand/forward flick - there is a reason this crack isn’t in my video...I didn’t manage one single forward flick, it felt absolutely uncomfortable ;) (even though I watched your video several times before where you did it effortlessly)

Posted: Mon 14. Oct 2019, 22:14
by Scott A. Cary
Jyri Haveri wrote:Stockwhips made me say few certain curse words from very old and refined vocabulary for curse words we have here in Finland.
This is the best thing I have heard all day! I literally laughed out loud.