Whips by Ethan Mitchell
- Jyri Haveri
- Member
- Posts: 2145
- Joined: Tue 28. Mar 2017, 12:40
- Ethan Mitchell
- Member
- Posts: 834
- Joined: Tue 11. Jul 2017, 23:47
- Location: Florence, KY
- Contact:
- Ethan Mitchell
- Member
- Posts: 834
- Joined: Tue 11. Jul 2017, 23:47
- Location: Florence, KY
- Contact:
- Ethan Mitchell
- Member
- Posts: 834
- Joined: Tue 11. Jul 2017, 23:47
- Location: Florence, KY
- Contact:
- Ethan Mitchell
- Member
- Posts: 834
- Joined: Tue 11. Jul 2017, 23:47
- Location: Florence, KY
- Contact:
- Ben Varsek
- Member
- Posts: 2446
- Joined: Mon 4. Apr 2016, 16:26
Ethan, that looks like a very good start for your matched set!
I'm sorry to hear about the heat issue on your previous project. One way to eliminate that problem would be the use of a "waterbath": if you take a container filled with water and palce your waxing pot above that container it will evenly get heated by the steam of the water container without gettin to hot at certain spots.
All the best
Ben
I'm sorry to hear about the heat issue on your previous project. One way to eliminate that problem would be the use of a "waterbath": if you take a container filled with water and palce your waxing pot above that container it will evenly get heated by the steam of the water container without gettin to hot at certain spots.
All the best
Ben
- Ethan Mitchell
- Member
- Posts: 834
- Joined: Tue 11. Jul 2017, 23:47
- Location: Florence, KY
- Contact:
- Ethan Mitchell
- Member
- Posts: 834
- Joined: Tue 11. Jul 2017, 23:47
- Location: Florence, KY
- Contact:
I am working on a performance hybrid whip. The hardware store doesn't sell any smaller sizes below 1/2". So I scaled up, with 20 plait grip on the handle and 16 plait thong in the works.
Once I complete the thong the handle grip will be waxed as well, along with the Honduras red-heart knob to to give it a nice finish.
Once I complete the thong the handle grip will be waxed as well, along with the Honduras red-heart knob to to give it a nice finish.
- Robert Gage
- C Member
- Posts: 13353
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Ethan Mitchell
- Member
- Posts: 834
- Joined: Tue 11. Jul 2017, 23:47
- Location: Florence, KY
- Contact:
- Robert Gage
- C Member
- Posts: 13353
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Ben Varsek
- Member
- Posts: 2446
- Joined: Mon 4. Apr 2016, 16:26
- Ethan Mitchell
- Member
- Posts: 834
- Joined: Tue 11. Jul 2017, 23:47
- Location: Florence, KY
- Contact:
- Andrew Van Werkhoven
- Member
- Posts: 454
- Joined: Wed 3. Oct 2018, 17:41
- Location: Beaudesert, QLD, Australia
- Ethan Mitchell
- Member
- Posts: 834
- Joined: Tue 11. Jul 2017, 23:47
- Location: Florence, KY
- Contact:
- Mark Elliott
- Member
- Posts: 4061
- Joined: Mon 11. Sep 2017, 20:28
- Location: Fritch, Texas US
- Contact:
- Rachel McCollough
- Member of the Ring
- Posts: 9856
- Joined: Tue 21. Apr 2015, 11:37
- Location: South Mississippi, USA
- Contact: