Next Video
- Ben Varsek
- Member
- Posts: 2446
- Joined: Mon 4. Apr 2016, 16:26
That really does , like Ben said, look very fluid.
I would watch out for creating limiting habits in working in a limited space. The only one I see is not extending your arm like you probably would in a larger space.
As stated before you would benefit greatly with more room or a little shorter whip.
You go really good with the space you have though.
Great job.
Ron
I would watch out for creating limiting habits in working in a limited space. The only one I see is not extending your arm like you probably would in a larger space.
As stated before you would benefit greatly with more room or a little shorter whip.
You go really good with the space you have though.
Great job.
Ron
It's ok if you disagree with me.
I can't force you to be right.
I can't force you to be right.
- Jessie Edwards
- Member
- Posts: 5763
- Joined: Thu 11. Jun 2015, 19:00
- Location: Wisconsin, USA
- Contact:
- Jessie Edwards
- Member
- Posts: 5763
- Joined: Thu 11. Jun 2015, 19:00
- Location: Wisconsin, USA
- Contact:
Russell, due to Robby being extremely busy with some other important projects, we set up the opposite overhead horizontal crack in the 10/10 area until Robby has time. He's a movie star, so he's busy starring in movies right now. Since he needs to earn his bread and butter, we are gonna handle the training in the 10/10 this time around. I don't think its been 10 days??? HAS IT? If so, Ill think of something else we can do, no problem.
Due to rising costs, dirty deeds are no longer done dirt cheap.
~Management
~Management
- Jessie Edwards
- Member
- Posts: 5763
- Joined: Thu 11. Jun 2015, 19:00
- Location: Wisconsin, USA
- Contact:
- Jessie Edwards
- Member
- Posts: 5763
- Joined: Thu 11. Jun 2015, 19:00
- Location: Wisconsin, USA
- Contact:
- Flemming Bo Christiansen
- Member
- Posts: 3404
- Joined: Tue 29. Aug 2017, 20:59
- Location: Denmark, Middelfart
Here my best for the day on this one. My whip is so short, that I have worked on sloving the first part down. Now when I see it on video, I see that the cattleman is too looks hysterically uncontrolled. That is not the "normal standard",so I have to revise on this one.
https://youtu.be/jG7FUHexkEw
https://youtu.be/jG7FUHexkEw
Today is a good day
- Robert Gage
- C Member
- Posts: 13380
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Flemming Bo Christiansen
- Member
- Posts: 3404
- Joined: Tue 29. Aug 2017, 20:59
- Location: Denmark, Middelfart
- Flemming Bo Christiansen
- Member
- Posts: 3404
- Joined: Tue 29. Aug 2017, 20:59
- Location: Denmark, Middelfart
- Ben Varsek
- Member
- Posts: 2446
- Joined: Mon 4. Apr 2016, 16:26
Flemming, thank you for sharing your video!
You are doing way better than me when I joined this challenge, good job!
One of the the many, many good things about this challenge is the we can observe and analyse our whipcracking sessions after we've shoot a video.
Just like you, I was very surpised to see what my practice sessions looked like from a "distant view".
What has helped me to reduce my bad habbit of using too much speed and force was to forget about the crack. Trying to do a technique with just enough force and speed to prevent the thong from falling down and without intendently trying to crack the whip worked wonders for me.
All the best
Ben
You are doing way better than me when I joined this challenge, good job!
One of the the many, many good things about this challenge is the we can observe and analyse our whipcracking sessions after we've shoot a video.
Just like you, I was very surpised to see what my practice sessions looked like from a "distant view".
What has helped me to reduce my bad habbit of using too much speed and force was to forget about the crack. Trying to do a technique with just enough force and speed to prevent the thong from falling down and without intendently trying to crack the whip worked wonders for me.
All the best
Ben
- Flemming Bo Christiansen
- Member
- Posts: 3404
- Joined: Tue 29. Aug 2017, 20:59
- Location: Denmark, Middelfart
- Ben Varsek
- Member
- Posts: 2446
- Joined: Mon 4. Apr 2016, 16:26