One on One Swap: For Morten
- Jesse Bessette
- Member
- Posts: 1596
- Joined: Sun 18. Dec 2016, 14:07
- Location: East Windsor, CT
- Brandon "Sparky" Lam
- Member
- Posts: 1314
- Joined: Thu 20. Oct 2016, 21:59
- Location: Melbourne, Australia
I'm sorry, but the wireless functionality requires you to be within 2 metres of your computer for it to work ahahaha
On a more serious note, I'm very happy it arrived!! The 3D printed name I should have designed it to be a bit larger, the letters are a little mushed together XD But unfortunately this was back when I didn't have a good heel knot to accommodate the names at the end, finally worked out one though~
I'll definitely roll the whip a bit more, I've been doing it with a slightly wider board, but if I wanted to get some of the more annoying bits I'll start using a smaller edge to get more pressure! ^_^ Will experiment a bit more too, the strand additions do that when I pull tight, so I might have to loosen up my pull for just those bits XD
Thanks Morten, I hope you enjoy this whip!! The swap was quite fun, definitely want to do it again.
Thanks Ron and Rachel!!
On a more serious note, I'm very happy it arrived!! The 3D printed name I should have designed it to be a bit larger, the letters are a little mushed together XD But unfortunately this was back when I didn't have a good heel knot to accommodate the names at the end, finally worked out one though~
I'll definitely roll the whip a bit more, I've been doing it with a slightly wider board, but if I wanted to get some of the more annoying bits I'll start using a smaller edge to get more pressure! ^_^ Will experiment a bit more too, the strand additions do that when I pull tight, so I might have to loosen up my pull for just those bits XD
Thanks Morten, I hope you enjoy this whip!! The swap was quite fun, definitely want to do it again.
Thanks Ron and Rachel!!
Give a man a fire and he's warm for the day. But set fire to him and he's warm for the rest of his life.
- Rachel McCollough
- Member of the Ring
- Posts: 9860
- Joined: Tue 21. Apr 2015, 11:37
- Location: South Mississippi, USA
- Contact:
- Ben Varsek
- Member
- Posts: 2446
- Joined: Mon 4. Apr 2016, 16:26
- Craig Frank
- Member
- Posts: 1233
- Joined: Thu 23. Jul 2015, 21:06
- Location: Arizona
- Brandon "Sparky" Lam
- Member
- Posts: 1314
- Joined: Thu 20. Oct 2016, 21:59
- Location: Melbourne, Australia