Roger Tuson
Roger Tuson
Finally, here are a couple of pictures from my whip swap build.
After my recent month-long hiatus from the forum and pretty much everything else to be honest, I got to work on the swap whip. It's a 6.5ft Bullwhip, twisted taper core, 10.5" handle, 8 and 12-plait bellies and a 16-plait overlay in black and coyote brown.
All started well...
The handle:
Note scoring on shaft to aid grip on the cords of the 'handle belly into twisted taper core':
Short transition binding over the tip of the handle and first section of core. This is then plaited over with the first 8-plait belly:
First belly binding:
Second belly binding (and this is where it all starts to go wrong ):
So, there I am, thinking, "Yup, that's enough binding - it's really stiff at the transition, the progression of the curve is good, let's start the overlay."
Now, I'm definitely no expert whipmaker but I have made a couple of half-decent ones and I genuinely thought I'd done a good second belly binding. But I forgot MY OWN RULE ON BINDING! "If you think you've done enough binding, do a bit more because you probably haven't"
Last night I finished the overlay. I'm sure a couple of you will sympathise with what I ended up with...
As it happens the binding around the actual transition is very stiff and I'm more than happy with it. It's the 'wet noodleyness' of the thong from about 2" after the transition that made my heart sink.
Although the rest of the thong is fine, tight plaiting, good seam and a nice six-point tip, I cannot in all conscience let this go out in this condition so I will have to take the overlay right back and add further binding.
With deadline approaching very fast, it's going to go right to the wire on this one! Still, focusses the mind if nothing else. :O
After my recent month-long hiatus from the forum and pretty much everything else to be honest, I got to work on the swap whip. It's a 6.5ft Bullwhip, twisted taper core, 10.5" handle, 8 and 12-plait bellies and a 16-plait overlay in black and coyote brown.
All started well...
The handle:
Note scoring on shaft to aid grip on the cords of the 'handle belly into twisted taper core':
Short transition binding over the tip of the handle and first section of core. This is then plaited over with the first 8-plait belly:
First belly binding:
Second belly binding (and this is where it all starts to go wrong ):
So, there I am, thinking, "Yup, that's enough binding - it's really stiff at the transition, the progression of the curve is good, let's start the overlay."
Now, I'm definitely no expert whipmaker but I have made a couple of half-decent ones and I genuinely thought I'd done a good second belly binding. But I forgot MY OWN RULE ON BINDING! "If you think you've done enough binding, do a bit more because you probably haven't"
Last night I finished the overlay. I'm sure a couple of you will sympathise with what I ended up with...
As it happens the binding around the actual transition is very stiff and I'm more than happy with it. It's the 'wet noodleyness' of the thong from about 2" after the transition that made my heart sink.
Although the rest of the thong is fine, tight plaiting, good seam and a nice six-point tip, I cannot in all conscience let this go out in this condition so I will have to take the overlay right back and add further binding.
With deadline approaching very fast, it's going to go right to the wire on this one! Still, focusses the mind if nothing else. :O
- Robert Gage
- C Member
- Posts: 13353
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Rachel McCollough
- Member of the Ring
- Posts: 9864
- Joined: Tue 21. Apr 2015, 11:37
- Location: South Mississippi, USA
- Contact:
@Craig - Thanks. They're my wife Kat's idea. She painted them all over the walls and ceiling, laving one area 'blank' for a dragon she's been planning for years.
Well, here's the re-bound thong:
Before plaiting...
And after... (sorry for the angle, couldn't fit it all in properly)
Much happier with it now. Have done the transition knot but had a bit of a 'mare with the heel knot, losing my foundation! :O
I've rebuilt the foundation but will have to leave the final knot until Tuesday.
Well, here's the re-bound thong:
Before plaiting...
And after... (sorry for the angle, couldn't fit it all in properly)
Much happier with it now. Have done the transition knot but had a bit of a 'mare with the heel knot, losing my foundation! :O
I've rebuilt the foundation but will have to leave the final knot until Tuesday.
- Rachel McCollough
- Member of the Ring
- Posts: 9864
- Joined: Tue 21. Apr 2015, 11:37
- Location: South Mississippi, USA
- Contact:
- Jeff Roseborough
- Member
- Posts: 1661
- Joined: Fri 3. Jul 2009, 09:12
- Location: Reno, NV, USA
- Robert Gage
- C Member
- Posts: 13353
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
Damn right! When you realise you have to go back and redo a huge section of work your heart kinda sinks but when you've done it and got back to where you were, seeing the improvement definitely makes it worth the effort. I haven't had an opportunity to test crack it yet (the weather's been awful) but tomorrow I'll get that heel knot sorted, test cracks done and (assuming all is good, which it should be), in the post and off to it's recipient. Talk about right down to the wire... :o
Do you know, I've been so wrapped up in making this whip, I forgot that someone's making one for me! Excited
Do you know, I've been so wrapped up in making this whip, I forgot that someone's making one for me! Excited
- Craig Frank
- Member
- Posts: 1233
- Joined: Thu 23. Jul 2015, 21:06
- Location: Arizona
It does look way better now. I've started to notice on some of mine that they have a good transition at first, but then wimp out after use. I'm not sure if it's a problem with not enough plaits or if my anchor at the handle tip starts to loosen up.
If I can't run fast, I'll make slow look impressive.
"By the power of ibuprofen!"
"By the power of ibuprofen!"
- Robert Gage
- C Member
- Posts: 13353
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Rachel McCollough
- Member of the Ring
- Posts: 9864
- Joined: Tue 21. Apr 2015, 11:37
- Location: South Mississippi, USA
- Contact:
- Jessie Edwards
- Member
- Posts: 5763
- Joined: Thu 11. Jun 2015, 19:00
- Location: Wisconsin, USA
- Contact:
Thanks Jessie, it's a 4-strand U4O4 - the first time I've managed to do it properly (now I understand handle diameter and required number of strands) and am really pleased with how it turned out. No gaps, tight plaiting and the thong s the straightest plaiting I've ever done.
Oh, and it's a six point end after Mr Robert suggested I carry more weight down towards the end.
Rachel, the colors are black and Coyote.
Oh, and it's a six point end after Mr Robert suggested I carry more weight down towards the end.
Rachel, the colors are black and Coyote.