Jeff Roseborough

- Roy Partin
- C Member
- Posts: 3471
- Joined: Thu 23. Jan 2014, 16:01
- Location: Red River County, Texas
- Contact:

- Robert Gage
- C Member
- Posts: 13869
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK

- Rachel McCollough
- Member of the Ring
- Posts: 9936
- Joined: Tue 21. Apr 2015, 11:37
- Location: South Mississippi, USA
- Contact:



- Rachel McCollough
- Member of the Ring
- Posts: 9936
- Joined: Tue 21. Apr 2015, 11:37
- Location: South Mississippi, USA
- Contact:



- Jeff Roseborough
- Member
- Posts: 1661
- Joined: Fri 3. Jul 2009, 09:12
- Location: Reno, NV, USA

- Robby Amper
- Member
- Posts: 4847
- Joined: Tue 30. Dec 2008, 20:40
- Location: Munich, Germany
- Contact:
To make a long story short: It arrived!!!!!
The paperwork was perfekt! It came right to my door. No problems!
I was planning to do a video - which I will do! - but without voice it would be not very informative. So give me a few days to become fit again and then I will do.
On the whip itself...
I was planning to write something like: "Jeff. Thank you. I received it. What can I say about it. It's interesting, absolutely."
But since my WB folks know me too good by far, it's pointless to try to make those jokes, to try to pretend anything which is not true. But I love to do such stupid jokes. There will be another chance, some day, I am sure.
The whip is a rough and tough one. Wide strands, a thicker handle (which I love!) and a very well done taper down the thong. It passed the two tests I always do first, and there was a surprise for me. But to hear about that you have to wait for the video. At least I have a surprise in stock for you
That whip really surprised me in two ways - just wait for the video 
Jeff. That whip is a good and solid one. I will talk about the details later on, but you should really sell them officially. And this is not a joke. I'm dead serious on that. I've seen whips from less quality from so called "professional" whip makers. You are ready to open your own homepage, Jeff.
And...you should do something to bring viewtopic.php?pid=71724#p71724 this thread to life! It is sad to see such a thread being so empty...
Robby





I was planning to do a video - which I will do! - but without voice it would be not very informative. So give me a few days to become fit again and then I will do.
On the whip itself...
I was planning to write something like: "Jeff. Thank you. I received it. What can I say about it. It's interesting, absolutely."
But since my WB folks know me too good by far, it's pointless to try to make those jokes, to try to pretend anything which is not true. But I love to do such stupid jokes. There will be another chance, some day, I am sure.
The whip is a rough and tough one. Wide strands, a thicker handle (which I love!) and a very well done taper down the thong. It passed the two tests I always do first, and there was a surprise for me. But to hear about that you have to wait for the video. At least I have a surprise in stock for you


Jeff. That whip is a good and solid one. I will talk about the details later on, but you should really sell them officially. And this is not a joke. I'm dead serious on that. I've seen whips from less quality from so called "professional" whip makers. You are ready to open your own homepage, Jeff.
And...you should do something to bring viewtopic.php?pid=71724#p71724 this thread to life! It is sad to see such a thread being so empty...
Robby
I have a screwdriver. I am Legend...



- Rachel McCollough
- Member of the Ring
- Posts: 9936
- Joined: Tue 21. Apr 2015, 11:37
- Location: South Mississippi, USA
- Contact:

- Jeff Roseborough
- Member
- Posts: 1661
- Joined: Fri 3. Jul 2009, 09:12
- Location: Reno, NV, USA
Thanks Robby! I can't wait to see the review. I've been wanting to send a whip to you for the longest time, the whip swap finally gave me the opportunity to do so. I'll start filling in my section soon.
Yes, it is a "rough and tough" whip by design. Being only 12 plait it does have wider strands. The handles on bullwhips I try for about 1 inch/25cm. I didn't bevel the strands on purpose so the edges would stand out a little bit giving it that "rough" look.
Yes, it is a "rough and tough" whip by design. Being only 12 plait it does have wider strands. The handles on bullwhips I try for about 1 inch/25cm. I didn't bevel the strands on purpose so the edges would stand out a little bit giving it that "rough" look.
Here's wishing you find time for the things you want to do, and for the things you need to do.
We see ourselves in our children and hope for a better future.
We see ourselves in our children and hope for a better future.


- Robby Amper
- Member
- Posts: 4847
- Joined: Tue 30. Dec 2008, 20:40
- Location: Munich, Germany
- Contact:
And...here we go. My voice was gone again after this one, but it was worth it 
https://youtu.be/K9OoMjugBrg
Enjoy, Robby

https://youtu.be/K9OoMjugBrg
Enjoy, Robby
I have a screwdriver. I am Legend...



- Robert Gage
- C Member
- Posts: 13869
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
Thanks very much for this, Robby! (Take care of that throat!) Jeff, that's quite wonderful. I love the thicker handle. The balance looks perfect. A really, really nice whip! 
And Ron is right: listen to Robby. I'm sure there are lots of people out there who'd like to buy such a fine whip.

And Ron is right: listen to Robby. I'm sure there are lots of people out there who'd like to buy such a fine whip.
'Less is often more!'

- Jessie Edwards
- Member
- Posts: 5763
- Joined: Thu 11. Jun 2015, 19:00
- Location: Wisconsin, USA
- Contact:
