Tyler Blake
- Tyler Blake
- Member of the Ring
- Posts: 4152
- Joined: Sat 27. Feb 2010, 09:03
- Location: Mount Vernon, Washington
- Contact:
I just now read through this, and it looks delightfully simple. I have a feeling that the tapering stiffness will do much good in addition to the tapering mass.
Now I'm thinking could it be possible to put all the staggered layers inside the fall? That would solve the problem with the cut ends fraying with use. It might be more than a bit difficult to do, but if you used Dacron as the outer layer, it just might be possible. It's surprising how much stuff you can fit through it.
Very nice, keep us updated on how it works in the long run
- Pokkis
Now I'm thinking could it be possible to put all the staggered layers inside the fall? That would solve the problem with the cut ends fraying with use. It might be more than a bit difficult to do, but if you used Dacron as the outer layer, it just might be possible. It's surprising how much stuff you can fit through it.
Very nice, keep us updated on how it works in the long run
- Pokkis
- Tyler Blake
- Member of the Ring
- Posts: 4152
- Joined: Sat 27. Feb 2010, 09:03
- Location: Mount Vernon, Washington
- Contact:
Pokkis, we seem to think alike I would have posted this years ago if I could have found a way to get them inside. I tried and tried, and this is what I finally settled on when the 10 watt bulb over my head went off and said "would it work thst way?
Yaprimascharif, Yahasanna Hadisany, elafinas tabachu, Dari chalemy elasin!
- Tyler Blake
- Member of the Ring
- Posts: 4152
- Joined: Sat 27. Feb 2010, 09:03
- Location: Mount Vernon, Washington
- Contact:
- Tyler Blake
- Member of the Ring
- Posts: 4152
- Joined: Sat 27. Feb 2010, 09:03
- Location: Mount Vernon, Washington
- Contact:
- Tyler Blake
- Member of the Ring
- Posts: 4152
- Joined: Sat 27. Feb 2010, 09:03
- Location: Mount Vernon, Washington
- Contact:
- Robert Gage
- C Member
- Posts: 13353
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Giovanni Celeste
- Member of the Ring
- Posts: 736
- Joined: Mon 28. Feb 2011, 15:11
- Location: italia - torino
- Contact:
Very cool Whip Tyler!!!
"Perfection has to be sought never reached. This is the only way to inspire and motivate creativity". www.giovanniceleste.it
- Simon Martin
- Member of the Ring
- Posts: 102
- Joined: Wed 12. Feb 2014, 12:18
- Location: Devonport, Tasmania
- Contact:
- Robby Amper
- Member
- Posts: 4847
- Joined: Tue 30. Dec 2008, 20:40
- Location: Munich, Germany
- Contact:
- Roy Partin
- C Member
- Posts: 3471
- Joined: Thu 23. Jan 2014, 16:01
- Location: Red River County, Texas
- Contact:
- Rachel McCollough
- Member of the Ring
- Posts: 9860
- Joined: Tue 21. Apr 2015, 11:37
- Location: South Mississippi, USA
- Contact:
- Tyler Blake
- Member of the Ring
- Posts: 4152
- Joined: Sat 27. Feb 2010, 09:03
- Location: Mount Vernon, Washington
- Contact:
- Mario Desgronte
- Member
- Posts: 667
- Joined: Sat 10. Apr 2010, 19:28
- Location: Germany, Koblenz