More Whips of H.Rutherford
- Robert Gage
- C Member
- Posts: 13825
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Rachel McCollough
- Member of the Ring
- Posts: 9933
- Joined: Tue 21. Apr 2015, 11:37
- Location: South Mississippi, USA
- Contact:
- Hayes Rutherford
- Member
- Posts: 289
- Joined: Wed 5. May 2021, 12:47
Thanks to you all for taking the time.
With as many methods as there are makers, I thought I would share my latest binding tensioner and holding clamp. Of course this could change but good for now.
Here is my artificial sinew on the same holder I use to hold paracord spools. By running it sinew through an old catalog and placing a couple of weights on it, I can easily adjust the tension when binding.
A small parallel clamp with a cleat screwed to it and a small vise found in a yard sale for hold a project while plaiting.
Looking north from one of the bays while kayaking.
With as many methods as there are makers, I thought I would share my latest binding tensioner and holding clamp. Of course this could change but good for now.
Here is my artificial sinew on the same holder I use to hold paracord spools. By running it sinew through an old catalog and placing a couple of weights on it, I can easily adjust the tension when binding.
A small parallel clamp with a cleat screwed to it and a small vise found in a yard sale for hold a project while plaiting.
Looking north from one of the bays while kayaking.
- Hayes Rutherford
- Member
- Posts: 289
- Joined: Wed 5. May 2021, 12:47
Our oldest daughter had purchased a roll of paracord to re-build some aluminum frame chairs and decidedd after one, no more. She has been well aware of the whip cracking and making that goes on here so passed the roll along to me and requested a whip. This is what I came up with. 6'4" thong, staggered paracord core, 10p belly, 14p overlay. Easy to crack and not yet waxed.
- Robert Gage
- C Member
- Posts: 13825
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Mark Elliott
- Member
- Posts: 4061
- Joined: Mon 11. Sep 2017, 20:28
- Location: Fritch, Texas US
- Contact:
- Hayes Rutherford
- Member
- Posts: 289
- Joined: Wed 5. May 2021, 12:47
- Ben Varsek
- Member
- Posts: 2446
- Joined: Mon 4. Apr 2016, 16:26
- Hayes Rutherford
- Member
- Posts: 289
- Joined: Wed 5. May 2021, 12:47
- Hayes Rutherford
- Member
- Posts: 289
- Joined: Wed 5. May 2021, 12:47
- Robert Gage
- C Member
- Posts: 13825
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Rachel McCollough
- Member of the Ring
- Posts: 9933
- Joined: Tue 21. Apr 2015, 11:37
- Location: South Mississippi, USA
- Contact: