Please post your donation... HERE!
- Robert Gage
- C Member
- Posts: 13777
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Jyri Haveri
- Member
- Posts: 2147
- Joined: Tue 28. Mar 2017, 12:40
https://youtu.be/ijpap2vV89M
Here it is. It works great!
It is very interesting to use whip made by someone else. This and the tassel whip i won last time are a lot more handle heavier whips than mine.
Thanks a lot sir Roger!
Here it is. It works great!
It is very interesting to use whip made by someone else. This and the tassel whip i won last time are a lot more handle heavier whips than mine.
Thanks a lot sir Roger!
- Robert Gage
- C Member
- Posts: 13777
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Mark Elliott
- Member
- Posts: 4061
- Joined: Mon 11. Sep 2017, 20:28
- Location: Fritch, Texas US
- Contact:
- Collin Weaver
- Member
- Posts: 522
- Joined: Fri 5. Oct 2018, 00:58
- Location: NY
Here are the first few teasers of Ben's whip. I literally only got a chance to hold it enough to place it in the light box and snap a couple photos, as I'm at work still.
Right off the bat though, I love the weight and balance of it. The taper starts immediately at the handle section, and finishes all the way down to an English eye hitch. No lumps or kinks to be spoken of either.
The fall is a twisted taper and weighted, and I noticed he takes the time to stitch the keeper loop on the end so no weight can come out and it's a very secure and safe system (Ben or anybody, if there's a tutorial on this method of fall I must have missed and if you can forward me the link ) The heel knot is perfectly symmetrical, tight, and beautifully done.
I told Ben I learned a lot from reading over tutorials and methods he has posted in the past, and I am honored to be holding one of his whips.
It's pouring rain today, so hopefully I can get a chance to do a quick cracking video this weekend and give this whip some love it deserves!
Cheers
Right off the bat though, I love the weight and balance of it. The taper starts immediately at the handle section, and finishes all the way down to an English eye hitch. No lumps or kinks to be spoken of either.
The fall is a twisted taper and weighted, and I noticed he takes the time to stitch the keeper loop on the end so no weight can come out and it's a very secure and safe system (Ben or anybody, if there's a tutorial on this method of fall I must have missed and if you can forward me the link ) The heel knot is perfectly symmetrical, tight, and beautifully done.
I told Ben I learned a lot from reading over tutorials and methods he has posted in the past, and I am honored to be holding one of his whips.
It's pouring rain today, so hopefully I can get a chance to do a quick cracking video this weekend and give this whip some love it deserves!
Cheers
- Robert Gage
- C Member
- Posts: 13777
- Joined: Fri 7. Feb 2014, 15:58
- Location: UK
- Robby Amper
- Member
- Posts: 4847
- Joined: Tue 30. Dec 2008, 20:40
- Location: Munich, Germany
- Contact:
- Jessie Edwards
- Member
- Posts: 5763
- Joined: Thu 11. Jun 2015, 19:00
- Location: Wisconsin, USA
- Contact:
Update: We are having a little trouble with paypal and some different policies from last year. Until they process all the documents they want from me, I’m unable to transfer the money to Robby. It will be done, I’ve talked it over with Robby and all is well. You all will be kept in the loop.
Due to rising costs, dirty deeds are no longer done dirt cheap.
~Management
~Management
- Ben Varsek
- Member
- Posts: 2446
- Joined: Mon 4. Apr 2016, 16:26
Collin, thank you very much! I've made the fall using Tyler's method for making loaded falls - credit goes to Tyler:
https://www.youtube.com/watch?v=KMeHI1ct6k4
Robert, Robby, thank you very much!
All the best
Ben
https://www.youtube.com/watch?v=KMeHI1ct6k4
Robert, Robby, thank you very much!
All the best
Ben
And today, finally, I tried Jyri’s 7ft stockwhip. Quite a difference to a bullwhip with strong transition...and it was too too windy for really good cracking practice.
At one point I was struggling to get a simple cattleman’s crack with my RIGHT hand whereas it worked with the left hand without any problem... The wind played a huge part in that (you can hear the noise in the background)
Anyway here is a little video, but I think I some more practice with this kind of whip to do it justice. But it’s super fun, I‘ll definitely take the time because with its long handle and light weight it just feels good. Not the „wrist-killing“ kind of whip. Probably requires a lot more movement with the whole arm.
https://m.youtube.com/watch?v=VVGlwvHGY ... e=youtu.be
At one point I was struggling to get a simple cattleman’s crack with my RIGHT hand whereas it worked with the left hand without any problem... The wind played a huge part in that (you can hear the noise in the background)
Anyway here is a little video, but I think I some more practice with this kind of whip to do it justice. But it’s super fun, I‘ll definitely take the time because with its long handle and light weight it just feels good. Not the „wrist-killing“ kind of whip. Probably requires a lot more movement with the whole arm.
https://m.youtube.com/watch?v=VVGlwvHGY ... e=youtu.be
- Jyri Haveri
- Member
- Posts: 2147
- Joined: Tue 28. Mar 2017, 12:40
Wolfgang well done!
Stockwhips made me say few certain curse words from very old and refined vocabulary for curse words we have here in Finland.
Just think that the handle is a long fork. Now imagine you take a hard boiled potato to the forks spikes.
Now you want to throw that potato from the forks spikes out of the window.
It is a little hard to explain but you can always try it
Now try the same movement with the whip with forward flick. If you cant go outside you can always try it inside, no need for a crack, just the voice you know you can get it to crack.
After this you may get the "click" feeling. In snake and bullwhips you want the energy to flow thru the handle and the transition to the tip. In stocks it goes right from the end of the handle to the tip. This is as it feels to me, they are just snappy buggers.
I did try it with my bolth hands and i didnt feel much difference. Maybe you just have to give those keepers some good cracking.
I hope you can get some help from this.
Stockwhips made me say few certain curse words from very old and refined vocabulary for curse words we have here in Finland.
Just think that the handle is a long fork. Now imagine you take a hard boiled potato to the forks spikes.
Now you want to throw that potato from the forks spikes out of the window.
It is a little hard to explain but you can always try it
Now try the same movement with the whip with forward flick. If you cant go outside you can always try it inside, no need for a crack, just the voice you know you can get it to crack.
After this you may get the "click" feeling. In snake and bullwhips you want the energy to flow thru the handle and the transition to the tip. In stocks it goes right from the end of the handle to the tip. This is as it feels to me, they are just snappy buggers.
I did try it with my bolth hands and i didnt feel much difference. Maybe you just have to give those keepers some good cracking.
I hope you can get some help from this.
Jyri, thank you VERY much this sounds like a very good analogy! The explanation helps a lot ... You are touching a point here with the overhand/forward flick - there is a reason this crack isn’t in my video...I didn’t manage one single forward flick, it felt absolutely uncomfortable (even though I watched your video several times before where you did it effortlessly)
- Scott A. Cary
- Member
- Posts: 2396
- Joined: Sat 22. Jul 2017, 22:25
This is the best thing I have heard all day! I literally laughed out loud.Jyri Haveri wrote:Stockwhips made me say few certain curse words from very old and refined vocabulary for curse words we have here in Finland.
I'll give it a try, Dad, but it's going to be really hard...kind of like trying to saw something in half using a banana.